Demonstration and Validation of an Ultrasonic Activated De-Paint Pilot Line at the Advanced Technology and Training Center near Robins AFB

Extended Energetics Toxicity Database for Machine Learning-Based Analysis

Functionalized Mesoporous Carbon Fiber Traps for Effective Recovery of Rare Earth Elements upon Extraction from End-of-Life Magnet Scrap

A New Chromium-free, Self-sealing Anodizing Process for DoD Application

Development and Delivery of Point-of-use Additives for PFAS-Free Fire Suppressants for Military Use

Control of Draining and Flow to Improve Fluorine Free Firefighting Foams

Rhamnolipid Enhanced FireFighting Foam (RE-FFFoam)

Performance Improvements of ADA Fluorine-Free Foams Using New Additives

Functional Additives to Enhance PFAS-Free Fire Suppressants

Development of Zwitterionic Additives to Aqueous Foams to Enhance Suppression of Aromatic and Aliphatic Fuel Pool-Fires

Use of Natural or Engineered Proteins to Extract and Purify REEs from Manufacturing and Post-consumer Waste

Environmentally Benign-phosphorous Polymer(s) Based Fire Suppression Additives via an Intumescence Mechanism

Quantification and Identification of PFAS and Total Fluorine During Thermal Degradation of Fluoropolymers in the Presence of Explosives

Development of PFAS-Free Fire Extinguishing Foam Based on New Siloxane-based Surfactant Formulations and Time-Released Foam Additives

Metal Organic Framework Inhibited Sealants

Functional Additives to Improve Fluorine-Free Fire Suppressant Foams

Self-intumescent Functional Additives for Fluorine Free Foam

Fire Retardant Additives Releasing Smart Beads for Fuel Pool Fire Fighting

Demonstration and Validation of PFAS-free Fire Suppression Foam

Demonstration and Optimization of PFAS-free Foams Based on Siloxane Surfactants for Pool Fire Suppression

Biological Ligands and Materials Design for Rare Earth Recovery and Separation

Chrome-free Twin Wire Arc Spray Coatings for Corrosion Protection of US Navy Ships and Other DoD Assets

Development of Chromium-Free Composite Coatings for Zinc and Zinc-Nickel Plating (P.E00.0616)

Power Demonstration of Green Propellant for F-16 Emergency Power Unit

High-aligned Short Fiber (TuFF) Technologies for Sustainable Composite Repair

• Blog (5/19/2021)

Structural Repair of Metal Alloys by a Solid-State Additive Deposition Process

• Blog (5/19/2021)

Application of Schiff Base Chemistry to Surface Passivation and Sealing of Plated Steels, Anodized Aluminum and IVD Coatings

• Blog Post (8/30/2021)

Optimization of Self-healing Fiber-reinforced Polymer-matrix Composites via Convolutional Neural Networks

• Blog (5/19/2021)

Electrochemical Transformation of ANSOL Using Electrically Conducting Membranes for the Production of Ammonia and Nitric Acid, the Destruction of High Energy Compounds, and Removal of Chromium

• Blog Post (4/5/2021)

Environmentally Sustainable ANSOL Reuse at Holston Army Ammunition Plant

• Blog Post (4/5/2021)

Wire Arc Additive Manufacturing for Aircraft Components

• Blog (5/19/2021)

Deactivation and Recycling of Lithium-ion Batteries using Chloroaluminate Ionic Liquids: a Holistic Approach with Low Energy Consumption and Small Environmental Impact

Demonstration of Mold and Mildew Preventative Epoxy Coatings for Naval Ship Interior Coatings

Focused Transition of SERDP/ESTCP Technologies in Field Maintenance Activities as an Innovative Means to Facilitate Implementation

Demonstration/Validation of Aluminum-Rich Primer on DoD Aviation Platforms

Novel Deposition Method for Chromium-Free Sealer for Metal Finishing Processes

• Blog Post (8/30/2021)

Qualification and Demonstration of Oxsol-Free and Low-VOC Topcoats for Surface Ships and Submarines

Enzymatic Conversion of Ammonium Nitrate Solution to Multiple Useful Industrial Feed-stocks

• Blog Post (4/5/2021)

Water Mist Fire Suppression as an Alternative to Military Specification Foam in Aircraft Hangars

Effective Chromate-free Post-treatment Sealer

• Blog Post (8/30/2021)

Interfacial Skin Layers for Surface Engineering

Electrospun Multifunctional Composite Fibers for Improved Warfighter Insect Protection

• WP21-3053 Interim Report - Year 1 (posted 8/22)

Purification of Ammonium-Nitrate Solution (ANSOL) by Electrochemical Removal of Nitramine Explosives and Chromium

Development of a Chromate Free ZnNi Passivation Treatment

Validation Testing of the Leading Commercially Available PFAS-Free Foams

Development of In-Field Methodology for Determination of Critical Foam Properties

Methodology for Accelerated Cr6 Substitution

Sustainable, Low Cost Production of Biosynthetic 1,2,4-Butanetriol and Butanetriol Trinitrate

Sandphobic Thermal/Environmental Barrier Coatings for Gas Turbine Engines

Selective Atmospheric Plasma Coating Removal (APCR) for Composite Substrates

PFAS-Free Foam / Compressed Air Foam, Fire Suppression Alternative

Validation of Fluorine-Free Fire Suppression Alternatives (FF_FSA) against Military Specifications

Extinguishing Class B Fires with PNS, an Environmentally-Friendly Compound

Hollow Microspheres based Fire Fighting Foams

• Final Report (posted 8/22)

Continuous Nitration of Alternative Cellulose Feedstocks

Testing of New Fluorine-Free Green Surfactant Mixtures to Replace AFFF

• Project Summary Presentation (posted 9/21)
• Fact Sheet (posted 4/22)

Green M213/M228 Fuze

Integrated Approach to Material State Assessment for Composite Manufacturing and Repair Waste Reduction

Demilitarization of Hexachloroethane-containing Smoke Ammunition by Sublimation and Carbonization

Demonstration and Validation of PFAS Free Fire Suppression Alternatives

Environmental Advantages of Additively Manufactured Micro-Turbine Engine

Innovative Nano-Encapsulated Ionic Liquid-Based Surfactants for Fluorine-Free Fire Extinguishing Foams

Identification of Critical Properties and Features of Surfactant Solutions for Firefighting Foams

THz Test Methodologies for Aircraft Coatings

Retrogressive Approach to Determine Fungal Biodegradation Responses and Mechanisms to Polyurethane-based Coatings

Closed Loop Recycling of Composite Waste Streams into High Performance Aligned Short Fiber Composites

Ambient Reactive Extrusion (ARE) for Design and Manufacture of Novel, Environmentally Friendly Gun Propellant Formulations for Additive Manufacturing

Multi-modal Corrosion Solutions for Aircraft Structures

• Webinar (11/04/2021)

Multipurpose 3D Waterjet for Machining and Stripping Coatings on Weapon Systems

• Webinar (September 10, 2020)

New Methodology to Assess Health and Environmental Impact of Flame Resistant (FR) Textiles

• Project Summary Presentation (posted 4/20)
• Final Report (posted 2/21)

Additive Manufactured Gun Propellants from UV Curable Nitrocellulose based Resins

Aircraft Engine Noise Reduction Technology

Cold Spray Coatings for Cr and Ni Plating Replacement

• Webinar (September 10, 2020)

WP-2740 Follow-On: Low-GWP Alternative Refrigerant Blends for HFC-134a

A Simple Surface Functionalization Method for Multifunctional Textiles With Flame and Vector Protection

• Final Report (posted 8/21)
• WP19-1050 Project Outbrief (posted 1/22)

Reaction Acceleration of Military Relevant Energetic Compounds and Precursors through Confined Volume Methodologies

Development of Novel Next Generation Cure-On-Demand Ultra High Solid (UHS) Non-Skid Coating

Biological Production of Thermal Stabilizers

Electrochemical Demilitarization of Energetic Compounds

Surfactant Transport at Fluid-Fluid Interfaces, from Bilgewater Emulsions to Firefighting Foams

Foam Quality Effects on PFAS Free Foam Firefighting Capabilities: A Demonstration of the Link Between Foam Quality and Extinguishment Capabilities and What's Being Produced by DoD Hardware

Advancing alternatives assessment and informed substitution for chemicals of concern: Case example of PFAS in AFFF

Development of Methodologies for Measuring and Predicting Emissions from Metal-Containing Propellants, Pyrotechnics, and Explosives

Solving Ambient Performance SeaSalt Obscurants

Flow Control of Large-Scale Coherent Turbulence to Reduce Jet Noise

• Final Report (posted 2/22)

Insect Resistant Textiles for Disease Vector Protection

• Final Report (posted 12/20)
• WP19-1096 Project Outbrief

Development of Pyrophoric Foam Materials for Environmentally-Benign Pyrotechnics

• Project Summary Presentation (posted 8/20)
• Final Report (posted 4/21)

Predictive Coating Condition Model for Advanced Asset Management

• Webinar (6/16/2022)

Validation of Fluorine-free AFFF against Military Specification Performance Criteria

• Webinar (October 8, 2020)
• Link Blog Post (4/29/2020)

Capabilities Assessment of Commercially Available PFAS-free Foams

• Webinar (October 22, 2020)
• WP19-5324 Project Outbrief (posted 4/21)
• WP19-5324 Video Project Outbrief
• Blog Post (12/07/2021)
• Blog Post (4/29/2020)

Screening Tests for Fluorine-Free Firefighting Foams

• WP19-5332 Project Outbrief (posted 9/21)
• Blog Post (4/29/2020)

Feasibility of a Thermoelectric Generator for a Reduced Environmental Impact Electronic Flare

• Final Report (posted 2/22)

Total Resource Utilization (TRU) Habitat

Predictive Corrosion Models to Mitigate Environmental Hazards on Ground and Rotary Wing Assets

• Webinar (6/16/2022)

High Color Purity Low Smoke Solvent-free Multi-color Signal Flares

An Experimental and Finite Element Modeling Approach to Determining Degradation of Aircraft Coating Systems

• Webinar (11/04/2021)

Electrospun Multifunctional Composite Fibers for Improved Warfighter Insect Protection

• Final Report (posted 9/20)
• Project Summary Presentation (posted 5/20)

Noise Abatement in Afterburning Jet Engines Using Chevron Seals

Environmentally Friendly 3D Printed Propulsion Charge

Additive Manufacturing of Gun Propellants using Vibration Assisted Direct Write Printing

Lithium Based Red Colorants in Environmentally Friendly Pyrotechnical Illuminants

Demonstration and Validation of a Battalion-Scale Waste To Energy Conversion System

• Webinar (2/24/2022)

Chrome-Free Coating System

Fluorine-Free Ionic Liquids for Aqueous Film Forming Foam

• Final Report (posted 4/22)

Pre-Demonstration Development of Controlled-Release Corrosion Inhibitors and Healing Agents as Alternatives to Hexavalent Chromium

• Final Report (posted 9/20)

Demonstration of Green Delay with T-10 Performance

• Webinar (07/08/2021)

Impact of Cleaning Tools on Wear of Biofouling Control Coating Systems and Copper and Zinc Release

• Webinar (October 31, 2019)

Deployable Waste to Energy Convertor (DWECX) for Expeditionary Contingency Bases with Thermal Energy to Electrical Power System (TEEPS)

• Webinar (2/24/2022)

Validation and Demonstration of Relative Humidity Controlled Accelerated Corrosion Test: New Specification Development

Environmentally Friendly Paint Removal from Military Components

Cleaning Tool Test Device to Support Quantifying the Impact of Cleaning Tools on Wear of Biofouling Control Coating Systems and Copper and Zinc Release

Fluorine Free Aqueous Film Forming Foams Based on Functional Siloxanes

• Final Report (posted 8/20)
• WP18-1638 Project Outbrief

Rotary Waste to Energy Converter for Overseas Contingency Operations

Revealing Bilgewater Emulsion Formation and Breaking by In Situ Multiplexed Chemical Imaging and Microfluidics

• Final Report (posted 8/20)
• Project Summary Presentation (posted 8/20)

Non-Catalytic Microwave Ignition of Green Hydrazine Replacements

• Final Report (posted 1/22)

A "Green" Propylnitroguanidine (PrNQ) Based Solution for Comp B Applications

• WP18-1299 Interim Report - Large-Scale Detonation Testing (posted 9/20)
• WP18-1299 Interim Report - In Vitro Toxicity (posted 8/21)
• Toxicity Report (posted 3/20)
• WP18-1299 Interim Report - PrNQ Photolysis (posted 12/19)
• WP18-1299 Interim Report - Energetic Formulation of Green Replacements for Composition B (posted 12/19)
• WP18-1299 Interim Report - PrNQ Properties (posted 3/19)

Relating the Phase, Flow, and Coalescence Behavior of Complex Shipboard Emulsions to the Physical and Chemical Properties of Model Surfactant-Oil-Water Systems

MTNI-based Replacement for Comp B in a Printed M67 Grenade

From Waste Steel to Weapons: Additive Manufacturing Enabled Agile Manufacturing

Understanding Shipboard Oil/Water Emulsions Using Macro- and Micro-scale Flows

• Webinar (June 4, 2020)
• WP18-1031 Project Outbrief
• Blog Post (12/07/2021)
• Final Report (posted 4/22)

Development of an Agile, Novel Expeditionary Battlefield Manufacturing Plant using Recycled and Reclaimed Thermoplastic Materials

• Webinar (4/21/2022)

An Integral Hypergolic Hybrid-Solid Fuel Ramjet Concept for AP-Free High Performance Tactical Rocket Motors

Recycling and Reuse of Metal Alloys by a Single Solid-State Additive Manufacturing and Repair Process

• Blog Post (6/25/2020)
• Webinar (4/21/2022)

Scalable Synthesis Development of MBANF

• Final Report (posted 2/21)
• WP18-1409 Project Outbrief

Formation of Detergent Stabilized Oil-Water Emulsion in Bilge Water and a Method to Thwart the Same

• WP18-1074 Project Outbrief (posted 2/22)

Preferential Surfactant Biodegradation for De-Emulsifying Bilge Water

Laser-induced Surface Structuring for Enhanced Surface Performance

Development of Green Tungsten Carbide

• Final Report (posted 9/21)

Demonstration of High Shear Rotary Membrane System (HSRMS) for Shipboard Bilgewater Treatment

Sustainable Methods for the Synthesis of High Temperature Thermosetting Resins

Atmospheric Plasma for Surface Modifications and Nanoscale Embedding of Chemistry for Corrosion Control and Adhesion Promotion

Corrosion Monitoring System to Reduce Environmental Burden and Corrosion Maintenance Costs

• Webinar (11/04/2021)

Environmentally-Preferred and Improved (Rapid) Laser Coating Removal Process for the Safe Removal of Coatings from Composite Substrates

• Final Report (posted 10/20)
• WP-201709 Project Outbrief
• Executive Summary (posted 8/21)

Investigation of Coating Degradation Mechanisms Induced by Fungi Using Open-Air Laser Spectroscopy and Spectrometry

Novel Fluorine-Free Replacement For Aqueous Film Forming Foam

• Blog Post (4/29/2020)

Alternative Mixing Technology for Environmentally Friendly Plastic Bonded Explosive Formulations

• Blog Post (02/22/2016)

Environmentally Conscious Process Development for the Production of Composite Propellants and Explosives

• Blog Post (03/21/2019)
• Final Report (posted 12/20)
• Webinar (February 27, 2020)
• Executive Summary (posted 6/21)
• Blog Post (02/02/2016)

Manufacture of Ordnance by In-Situ Resonant Acoustic Mixing

• Blog Post (2/22/2016)

Demonstrating Viability of Low VOC E-coat Primers for General Depot Use

• Webinar (October 31, 2019)
• WP-201620 Project Outbrief (posted 3/22)

Validation/Demonstration of a Zero-VOC/HAPS-NC Wash Primer for Department of Defense Weapons Platforms

Sustainable Alternative Biobased Cleaner, Lubricant, and Preservative for Weapons and Weapons Systems

Qualification Testing of Electroformed Nanostructured Cobalt-Alloy Bushings

Demonstration of Novel Green Electrical Solid Propellant for Army Tactical Rocket Propulsion

Energetic Manufacturing via Advanced Flow Reactor Technology

Sustainable, Environmentally Green Polyurethanes for Erosion-Resistant Coatings

Enabling Lead-Free Interconnects in DoD Weapon Systems

• Project Summary Presentation (posted 10/17)

Environmentally Sustainable Gasless Delay Compositions for Fuzes

• Webinar (07/08/2021)
• Final Report (posted 8/22)

Environmentally Benign Multi-Component Delay System with Tunable Propagation Characteristics

• Blog Post (11/21/2016)
• Final Report (posted 8/20)
• Webinar (February 27, 2020)

Environmentally-benign Conductive Polymer Passivating Coatings

• Final Report (posted 4/19)

Demonstration and Validation of Siloxane-Based Aircraft Topcoats that are Isocyanate-Free and Provide a Reduced Environmental Impact

• Blog Post (12/15/2020)

Green Processing of Energetic Materials Using Resonant Acoustic Mixing Technology

• Blog Post (12/04/2018)
• Blog Post (02/02/2016)

Demonstration of DBX-1 as an Alternative to RD-1333 Lead Azide

One Step No Waste Composition C-4 Production

• Final Report (posted 3/21)
• WP-201508 Project Outbrief
• Executive Summary (posted 7/22)

Demonstration of Stacked High Shear Rotary Membrane System (HSRMS) for Shipboard Bilgewater Treatment

• Final Report (posted 2/18)
• Cost and Performance Report (posted 6/18)

Improved Degreasing Solvents Based on Ionic Liquids

• Final Report (posted 6/18)

Waste-to-Energy Thermal Destruction Identification for Forward Operating Bases

• Final Report (posted 10/18)

Environmentally Sustainable Cast-Cure Binder Systems

Synthesis and Evaluation of Tetrazole-Based Binder Systems in Pyrotechnics

Diels Alder Cures: Isocyanate Replacement and Polymer Remediation

Novel Chemistries for Replacement of Methylene Dianiline in Polyimide Composites

• Blog Post (06/15/2017)
• Blog Post (10/13/15)
• Webinar Series (01/22/2015)

Isocyanate-Free Solid Rocket Motor Propellant Binders Inspired by Nature

• Project Summary Presentation (posted 9/16)
• Blog Post (11/23/2015)
• Webinar Series (01/22/2015)

Development of Low-Toxicity Liquid Propellant System for Orbital/Sub-Orbital Applications

Proof of Concept Novel Low-Toxicity Obscurant

High Temperature PEEK-Like Phthalonitrile Replacement for Polyimides Containing Methylene Dianiline (MDA)

• Blog Post (10/13/15)

Qualification, Demonstration, and Validation of Non-Hazardous Solvent to Clean Composite Aircraft Components

• Blog Post (04/27/2015)

Liquid Fuel Fire Alternative

• Final Report (posted 07/18)

Environmentally Friendly Fastener Coating Demonstration

• Final Report (posted 8/22)

Copper-Free Antifouling Coatings: Demonstrating a 12-Year Application

Generating a Synthetic Biology Toolbox for Nitroorganics

Chrome Replacement for Gun Barrels

• Blog Post (03/17/2014)

Vinyzene-Max: An Environmentally-Friendly Replacement for Tri-Butyl-Tin-Based Biocides in USN Surface Ship Bow SONAR Domes

Scale-Up and Formulation of Green Insensitive DEMN Based Secondary Explosives

Demonstration of a Polypropylene Packed Material for the Treatment of Solids in Shipboard Bilgewater

• Final Report (posted 7/18)

Cyanate Ester Composite Resins Derived from Renewable Polyphenol Sources

• Blog Post (11/28/2016)
• Webinar Series (01/22/2015)

Beryllium Replacement Using Coated Powder Metal Matrix Materials

Demonstration/Validation of Zinc-Nickel as Replacement for Cadmium/Cyanide Plating Process for Air Force Landing Gears

• Final Report (posted 9/19)
• Blog Post (12/07/2015)

Comprehensive Evaluation and Transition of Non-Chromated Paint Primers

• Webinar Series (02/11/2016)

Novel Lead-Free Ballistic Modifiers for Improved, IM-Compliant Minimum Signature Propellants

Compressor Airfoil Protective Coatings for Turbine Engine Fuel Efficiency

• Final Report (posted 2/22)

Ultraviolet-Curable Powder Coatings

• Limited Distribution

Tri-Service Green Gun Barrel

• Final Report
• Blog Post (03/17/2014)

A Fluorine-free, 100% Bio-based Fire-fighting Material

Tropodegradability and Micellization: New Approaches to Achieving Ozone-Safe Solvents