For mobile, landscape view is recommended.
Originally presented in December 2009, the attached document provides training on the use and implementation of four recently developed decision and management tools for DNAPL source zones—(1) a screening tool for selection of DNAPL source area remedial technologies; (2) a decision tool for optimization of chlorinated solvent source and plume remediation considering uncertainty; (3) a design tool for planning aqueous amendment injection systems; and (4) a tool for using multiple lines of evidence in conjunction with source zone models to assess changes in mass discharge. In addition, an overview of a recent decision guide on DNAPL source zone management is provided. As tools become available, they will be posted on the Tools & Training page.
The material in its entirety is covered in the PDF file. The original training was recorded as a series of Adobe Flash videos, as shown below. Since browsers no longer support Flash, this information is provided solely for reference.
|
|
|
|
Module 1 (1:00 hour) |
Source Zone Protocol for Remedy Selection of Chlorinated Solvents Released at DoD Facilities Presented by Dr. Thomas Sale and Dr. Charles Newell |
|
Module 2 (41:45 min) |
Development of a Protocol and Screening Tool for Selection of DNAPL Source Area Remediation Presented by Ms. Carmen Lebrón, Dr. Bernard Kueper, and Dr. David Major |
|
Module 3 (57:30 min) |
Decision & Management Tools for DNAPL Sites: Optimization of Chlorinated Solvent Source and Plume Remediation Considering Uncertainty Presented by Dr. Ronald Falta and Dr. Newell |
|
Module 4 (28:18 min) |
Emulsion Design Tool for Planning Aqueous Amendment Injection Systems Presented by Dr. Robert Borden |
|
Module 5 (24:13 min) |
Permanganate Design Tool for Planning Aqueous Amendment Injection Systems Presented by Dr. Borden |
|
Module 6 (59:58 min) |
Improved Field Evaluation of NAPL Dissolution and Source Longevity Presented by Dr. Michael Kavanaugh, Dr. Mark Widdowson, and Dr. Lloyd "Bo" Stewart |